Search results

Showing 20 of 219 results for term: A

Arlatone™ TV

Polyoxyethylene (40) Sorbitol Peroleate

Arlatone T is a sorbitol based surfactant and is a recommended emulsifier for vegetable oils.
Atlas™ G-1096

Polyoxyethylene (50) sorbitol hexaoleate

Atlas G-1096 is a sorbitol based surfactant and is a recommended emulsifier for vegetable oils.
Atlox™ 1045A

Polyoxyethylene (30) sorbitol oleate-laurate

Atlox 1045A is a sorbitol based surfactant and is a recommended emulsifier for vegetable oils.
Atplus™ UEP-100

Alkoxylated polyol ester

A built-in adjuvant designed to enhance the uptake of systemic or translaminar active ingredients with additional spray retention and humectancy properties.
Crodafos™ C10/5A

PEG-10 PPG-5 cetyl phosphate

An alkoxylated phosphate ester with good performance as a wetting agent or emulsifier in highly loaded micronutrient systems.
Multitrope™ 1620

C8-C10 Alkylpolysaccharide

Multitrope 1620 is an alkyl polysaccharide which has good environmental credentials. It offers effective spray retention and spreading aid properties, is more electrolyte tolerant than other surfactants and is a humectant.
Lissapol™ BN 200L

Anionic surfactant blend

Sodium salt of Linear Alkyl Benzene Sulphonate anionic surfactant based free flowing powder, recommended as a wetting agent for WP and WDG formulations.
Lissapol™ D POWDER

Anionic surfactant blend

Lissapol D Powder is an anionic surfactant which acts as a wetting agent for Wettable Powder and Water Dispersible Powder formulations.
Crodaquat™ TES

Polyoxyethyene tallow ethylmonium ethosulfate

Crodaquat TES is a cationic surfactant which works effectively as an emulsifier.
Atlox Rheostrux™ 100

Polyester block co-polymer

Easier to process than clays and silicas Compatible with most common crop oils Superior rheology profiles Improved viscosity control Enhanced stability Better suspensibility performance Facilitate production of large batches of gelled oil
Atlox Rheostrux™ 200

Polyamide

Easier to process than clays and silicas Compatible with most common crop oils Superior rheology profiles Improved viscosity control Enhanced stability Better suspensibility performance Facilitate production of large batches of gelled oil
Atlox™ AL-3382

PEG-5 octyl phosphate

Phosphate ester designed for improved emulsion stability in high electrolyte conditions. High cloud point of material gives strong performance as a ME stabiliser.
Synperonic™ A2

Polyoxyethylene (2) C12-C15 alcohol

Synperonic A2 is a synthetic alcohol ethoxylate. It functions well as a low HLB surfactant in Emulsifiable Concentrate and Microemulsion formulations.
Atlox™ 4838B

Calcium alkylaryl sulphonate in solvent

An oil-soluble anionic emulsifier for improved stability and blooming of formulations upon dilution. Commonly used as part of a triangle screen formulation approach.
Arlacel™ 165

Glycerol mono and distearate and polyoxyethylene-stearate

Arlacel 165 is a blend of emulsifiers and adjuvants which works effectively in oil in water emulsions.
Synperonic™ A3

Polyoxyethylene (3) C12-C15 alcohol

Synperonic A3 is a synthetic alcohol ethoxylate. It functions well as a low HLB surfactant in Emulsifiable Concentrate formulations.
Synperonic™ A4

Polyoxyethylene (4) C12-C15 alcohol

Synperonic A4 is a synthetic alcohol ethoxylate. It functions well as a low HLB surfactant in Emulsifiable Concentrate formulations.
Synprolam™ 35X15

Polyoxyethylene alkylamine

Synprolam 35X15 is an amine ethoxylate which has good emulsification properties. It is used as an effective glyphosate adjuvant.
Crodateric™ CYAP

Sodium capryloamphopriprionate

Crodateric CYAP is an amphoteric surfactant with excellent hydrotropic effects.
Atlox™ AL-3307

Anionic and nonionic surfactant blend

Atlox AL-3307 is a blend of emulsifiers which is recommended for use in Emulsifiable Concentrate formulations.

«
1
4
5
6
11
5 of 11
»

Showing 20 of 81 results for term: A

Terms and conditions

Croda terms and conditions
Accessibility statement

Croda accessibility statement
Surfactants as soil wetters

Explore our wetting products that not only decrease the time it takes for water to be absorbed from the surface but also evenly and thoroughly wet the whole soil.
Formulating for organic production

Find out more about formulating for organic production and which products in our portfolio are suitable.
Croda’s first product launch specifically focusing on the biopesticide market

Croda has launched the new product Atlox™ BS-50, a ready-to-use wettable powder (WP) delivery system which specifically meets the needs of the growing biopesticide market.
On-demand webinar | Advancing biologicals delivery

As part of the ISAA 2025 Conference's monthly webinar series, Croda Agriculture kicked off the event with insights into latest agrochemical trends. The webinar covered key challenges in formulating microbial biopesticides, essential considerations before formulation, and potential product solutions.
Seed treatment

Discover more about seed treatments including formulations and seed enhancing processes.
Hear from our experts: Formulating biologicals

Steve Adams our Global Research and Technology Manager at Plant Impact shares his thoughts and opinions on the use of biologicals in agriculture and how it is shaping the industry.
Croda launches new drone adjuvant Atplus™ DRT-7000 targeted at the Asian market

Croda has unveiled its latest drone adjuvant Atplus™ DRT-7000, specially formulated to enhance drift control and improve wetting/spreading in tank mix applications for low volume spray operations like drone applications.
OMRI Listed: organic surfactants and adjuvants

OMRI Listed certifies that Croda’s surfactants and adjuvants meet organic standards, making them suitable for use in organic crop protection products.
Formulation of microbial biopesticides

Microbes can be beneficial throughout agriculture. Probably the most well-known are biopesticides, which can control insects (bioinsecticides) or pathogens (biofungicides).
The new microplastics legislation - what does it mean for seed treatments and coatings?

Hear Marta Dobrowolska-Haywood discuss the microplastic regulations.
Whitepaper: A microplastic-free future for seed treatment

As new microplastic legislation transforms agriculture, what does the future hold and how do we get there?
Privacy policy

Privacy policy
Optimising efficacy through agricultural adjuvant inclusion

How Croda’s applications team have carried out testing to directly show the impact of adjuvant inclusion on herbicide performance.
Atlox™ CS 200: Multifunctional ingredient blend for pesticide capsule suspension (CS) formulations

Targeted at the Indian market, Atlox CS 200 is a synergetic blend suitable for making pesticide capsule suspension (CS) formulations.
Emulsifiable concentrate (EC)

Emulsifiable concentrates (ECs) are still one of the most common formulation types for crop protection products worldwide, it is a combination of an active ingredient dissolved in a solvent with emulsifiers.
Dispersible concentrate (DC)

Dispersible concentrates (DCs) are liquids with actives in polar solvents and low-water surfactants, like dispersants, for stability on dilution.
Concentrated aqueous emulsion (EW)

EW formulations for pesticides are physically stabilised by specifically identified polymeric surfactants incorporated at an appropriate level.
Capsule suspension (CS)

Defined as capsule suspension, CS formulations contain an active ingredient in a polymer shell, suspended in water with a dispersant and wetting agent.

«
1
2
3
4
5
1 of 5
»

Showing 20 of 119 results for term: A

Trichoderma sp. 20 w/w OD

Biological formulations can be challenging to produce. In this Trichoderma sp. OD formulation, the ingredients have been carefully selected to be safe for the microorganisms and maintain their viability. The Croda ingredients also provide enhanced end point stability and performance which is often difficult to achieve when formulating with biologicals. This formulation allows the incorporation of a higher concentration of active ingredient, compared to others available on the market. It is important to note that if a different microorganism or oil is used, the formulation may need adjusting. For advice about this please get in touch
Rapeseed oil-based microbial OD chassis system

This is a chassis formulation for developing OD formulations which can speed up the development process. It contains all components required except the active ingredient. The surfactants and their relative ratios are predetermined and have been optimised for a rapeseed oil continuous phase. This chassis system can include an active ingredient at an inclusion level of 20% w/w.
Soybean oil-based microbial OD chassis system

This is a chassis formulation for developing OD formulations which can speed up the development process. It contains all components required except the active ingredient. The surfactants and their relative ratios are predetermined and have been optimised for a soybean oil continuous phase. This chassis system can include an active ingredient at an inclusion level of 20% w/w.
Sunflower oil-based microbial OD chassis system (option 2)

This is a chassis formulation for developing OD formulations which can speed up the development process. It contains all components required except the active ingredient. The surfactants and their relative ratios are predetermined and have been optimised for a sunflower oil continuous phase. This chassis system can include an active ingredient at an inclusion level of 20% w/w.
Sunflower oil-based microbial OD chassis system (option 1)

This is a chassis formulation for developing OD formulations which can speed up the development process. It contains all components required except the active ingredient. The surfactants and their relative ratios are predetermined and have been optimised for a sunflower oil continuous phase. This chassis system can include an active ingredient at an inclusion level of 20% w/w.
Lambda-cyhalothrin 96 g/L – Thiamethoxam 126 g/L ZC

This ZC (CS + SC) formulation includes a Thiamethoxam in a SC form combined with Lambda-cyhalothrin microcapsules in an aqueous phase.
Manganese carbonate, 930 g/L SC

Suspension concentrate formulation of manganese carbonate developed using polymeric surfactants which promote long term formulation stability, Atlox Metasperse™ 500L and Atlox™ 4894L.
Manganese carbonate, 930 g/L SC

Suspension concentrate formulation of manganese carbonate developed using polymeric surfactants which promote long term formulation stability, Atlox™ 4919 and Atlox 4894L.
Manganese Carbonate 800 g/L SC

A highly-loaded manganese carbonate suspension concentrate (SC) formulation with long stability attributed to the use of a polymeric dispersant.
Difenoconazole 100 g/L EC

A 100 g/L difenoconazole formulation designed to reduce the hazardous components while maintaining performance. Methylated rapeseed oil has replaced a traditional solvent and the optimised surfactant package removes the need for an anionic component that would often carry eye toxicity hazards.
Diflufenican 40 g/L + 400 g/L (333 g/L a.e.) Glyphosate IPA SC

A combination herbicide suspension concentrate containing high levels of glyphosate. Long term stability of the formulation is achieved using polymeric surfactants.
Pelargonic Acid 582 EC

A highly loaded emulsifiable concentrate containing the contact herbicide pelargonic acid. Pelargonic acid is known to have a freezing point of ~ 12 °C making obtaining cold temperature stable a challenge for formulators.
Atrazine 480 g/L SC

A suspension concentrate (SC) formulation containing atrazine. Long term stability is achieved using polymeric surfactant, Atlas™ G-5200L and an acrylic hybrid solid aqueous disperant, Atlox Metasperse™ 650S.
OMRI surfactant systems for microbial ODs – sunflower and corn oil

This oil dispersion (OD) formulation is suitable for formulating microbes in a water free environment. This example uses Bacillus sp. but can be suibstituted for other microbe active ingredients.
Calcium carbonate, 1035 g/L SC

Suspension concentrate formulation of calcium carbonate developed using polymeric surfactants which promote long term formulation stability, Atlox Metasperse™ 500L and Atlox™ 4894L.
Acetochlor 290 g/L - Atrazine 145 g/L ZC

This ZC formulation is a combination of two actives: Atrazine in a SC form and Acetochlor microcapsules in an aqueous phase
2,4-D Amine Salt 400 g/L (320 gae/L) - 2,4-D Ethylhexyl Ester 185 g/L (125 gae/L) ME

A stable microemulsion incorporating 2,4-D amine salt (water soluble) and 2,4-D ethylhexyl ester (oil soluble).
Mancozeb 64% + Metalaxyl 8% WP with Multiwet™ 8269

This Wettable Dispersible Powder (WP) formulation contains a high loading of a mixture containing the non-systemic fungicide of Mancozeb and systemic fungicide of Metalaxyl.
Beauveria sp. 30 WP

Wettable powder formulation containing a high loading of Beauveria sp., a microbial insecticide. Effective wettability and dispersibility with maintenance in microbe viability is achieved using Atlox BS-50.
Metarhizium sp. 30 WP

Wettable powder formulation containing a high loading of Metarhizium anisopliae, a microbial insecticide. Effective wettability and dispersion of this biological formulation is achieved using Atlox™ BS-50 which also may not affect the viability of the microorganism.

«
1
2
3
4
6
1 of 6
»

Search results

Polyoxyethylene (40) Sorbitol Peroleate

Polyoxyethylene (50) sorbitol hexaoleate

Polyoxyethylene (30) sorbitol oleate-laurate

Alkoxylated polyol ester

PEG-10 PPG-5 cetyl phosphate

C8-C10 Alkylpolysaccharide

Anionic surfactant blend

Anionic surfactant blend

Polyoxyethyene tallow ethylmonium ethosulfate

Polyester block co-polymer

Polyamide

PEG-5 octyl phosphate

Polyoxyethylene (2) C12-C15 alcohol

Calcium alkylaryl sulphonate in solvent

Glycerol mono and distearate and polyoxyethylene-stearate

Polyoxyethylene (3) C12-C15 alcohol

Polyoxyethylene (4) C12-C15 alcohol

Polyoxyethylene alkylamine

Sodium capryloamphopriprionate

Anionic and nonionic surfactant blend